How Much Concrete Do I Need for a Curb? Long Runs Add Up Fast
A curb is a long, thin rectangle — its length runs far longer than its width or height, so the volume is small per foot but adds up fast over a long run.
The formula
Volume = Length × (Width ÷ 12) × (Height ÷ 12) ÷ 27 for cubic yards.
Width and height are usually given in inches, so divide each by 12 to get feet first, then ÷ 27 to convert cubic feet into cubic yards.
A worked example: 100 ft of 6 in wide by 6 in high curb
- Volume: 100 × 0.5 × 0.5 = 25 cubic feet
- Cubic yards: 25 ÷ 27 = 0.93 cubic yards
- With 10% waste: 1.02 cubic yards — 46 × 80 lb bags
Add 10% waste on long runs: forms always leak a little. Stake forms every 3 to 4 ft to hold a straight line, put expansion joints every 10 ft to stop random cracking, and round the top edge slightly — it chips less than a sharp one.
Sizing
Six inches wide and 6 inches high suits landscape edging; road kerbs run bigger.
Ready-mix or bags?
Over about 2 cubic yards (roughly 200 ft of 6×6 curb), ready-mix is cheaper and far faster than bags.
If you would rather not do the arithmetic by hand, run the same numbers through a curb concrete calculator — it totals any length so your edging order is exact.
Comments
Post a Comment